 | 
|
EK-FC1080 GTX TF6 is a high-performance full-cover nickel water block for MSI non-reference design MSI® GeForce® GTX 1080, -1070 and 1060 GAMING series graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list!
This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas, thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC1080 GTX TF6 water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.
The base of the block is made of nickel-plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for a safe and painless installation procedure.
EK Water Blocks recommends the purchase of aesthetic retention backplate (EK-FC1080 GTX TF6 Backplate - Black, Nickel) which improves the looks of your graphics cards and also provide some passive cooling to the circuit board VRM section.
G1/4" threaded fittings can be used on both sides of the FC Terminal. Up to four EK-FC1080 GTX TF6 water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block.
We recommend EK-Cable PWM Fan Adapter for GPU for connecting your GPU to PWM-enabled fans in your custom loop and thus controlling the PWM profiles based on the graphics card temperature.
Enclosed:
- EK-FC1080 GTX TF6 series water block
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts and washers
- 2x EK plug G1/4”
- 6mm Allen key
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)
EK-Quantum Scalar² DirectLink Terminal - Plexi is an acrylic terminal that replaces the stock version of the black POM acetal terminal on the EK-Quantum Vector² Strix/TUF RTX 4080 and 4090 ABP Sets. It connects the water block with the active backplate. Sleek magnetic covers can be used to conceal the terminal screws. They allow rotation of the branding when the GPU water block is inverted in the case or is being used on a vertical GPU mount. The magnetic covers are not part of the package and should be re-used from the original terminal that came with the ABP set.
The DirectLink flow solution is the first multiple-block solution to implement a conventional 4-port terminal layout, allowing serial and parallel connections from adjacent or opposing sides of the block. It was made possible by adding a machined brass insert in the terminal that diagonally links the water block directly to the active backplate inside the acetal terminal. These brass inserts are not part of the package and should be taken from the original terminal that came with your Strix/TUF RTX 4080 or 4090 ABP set.
DirectLink proves invaluable when flexibility is required for the right setup, as in the case of a distribution plate or vertical GPU mount.
This terminal is CNC-machined out of glass-like cast acrylic.
Compatibility:
- EK-Quantum Vector² Strix/TUF RTX 4080 ABP set
- EK-Quantum Vector² Strix/TUF RTX 4090 ABP set
Technical Specification:
- Ports: 4 x G1/4"
- Dimensions (L x H x W): 72 x 23 x 41mm
- Material: CNC-machined Cast Acrylic
Facebook
Instagram
RSS News
