Alphacool Aurora LED Ring 50mm - RGB

Alphacool
Alphacool
This product is no longer available for sale
Item code : 13749
EAN : 4250197152761
Non-contractual photos
Technical details

Following Alphacool’s motto “The next step in modding and style”, the Aurora is a simple way to illuminate your reservoir with brilliant colours. Colour variants are available in red, blue, green, white, and UV. This last one is especially good for UV-active cooling fluid, where the fluid itself will start to glow. Now Alphacool is going one step further and offering it in RGB, too. Between the ring and the 4-pin molex plug is an RGB controller, where you can set the colour and brightness.

Two sizes are available, one for tube reservoirs with a 50mm diameter and one for a 60mm diameter. The 50mm version is equipped with 18 LEDs, the 60mm version with 24 LEDs. The high number of LEDs makes the illumination much stronger than with the classic single LEDs. You can also install two or more Auroras on one reservoir.

Installation is extremely simple. No tools are needed. The Aurora simply slides over your reservoir and is held in place with two rubber rings. The LEDs are powered through a 4-pin molex connection. This can be attached directly to the motherboard, to a separate fan controller, or directly to a power pack with an adaptor cable.

Technical Details:

  • Dimensions (HxID): 20 x 50mm
  • LED: 18x RGB
  • Material: black plastic
  • Connection: 4-pin (30cm)

Scope of Delivery:

  • 1x Alphacool Aurora LED Ring 50mm - RGB

Up to 10% discount on Watercooling by entering the code COOL10 in your basket
Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.

Please choose a category

Special offer

20% OFF

Alphacool's new Low Noise Edition of the Laing DDC for absolute silence! 

The Laing DDC pump is one of the best known pumps in the watercooling industry. Recently we have been working with Laing to take the DDC to the next level. The new Laing DDC310 was designed with a perfect balance of power and silence in mind. Unlike other versions with the plastic base we have revised the design with new superbly tuned brass housing which aids the pumps cooling and guarantees longer life especially when placed in areas with limited airflow.

This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved.

Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case.

The pump also comes as standard with an anti-vibration mounting system . Available in black nickel and silver nickel.

This pump should be the first choice for your watercooling system.

Technical Details

  • Dimensions: 61 x 60 x 21mm
  • Color: Black nickel, black
  • Power consumption: 10W
  • Material: Brass, Stainless Steel, Aluminium oxide, hard coal
  • Maximum lifting height: 2,44m
  • Maximum system temperature: 60 ° C
  • Maximum flow: 200l / h
  • Voltage: 12V DC
  • Power connector: 4 Pin Molex
  • Tacho signal: 3-Pin Molex

Scope of delivery

  • 1x Alphacool Laing pump DDC310
  • 1x Alphacool Laing DDC bottom metal - black nickel
  • 1x Thermal
  • Decoupling
  • mounting material

Download 3D-file (.stp)

 

Datasheet

Note
Not suitable for continuous operation with liquids containing titanium dioxide or glycerine. Typically, many pastel colors use these additives.