Alphacool Eisdecke DDC/D5 single reservoir for Alphacool Eisdecke top

Alphacool
Alphacool
29,90 €
1 to 2 weeks delay
Out of stock
1 to 2 weeks delay
Item code : 13518
EAN : 4250197131872
Non-contractual photos
Technical details

Space saving, simple, practical and manifold describes this outstanding product.

A simple mounting on the essays for the Laing DDC and the Laing D5 or VPP655 make this reservoir an integral part of water cooling. Due to the compact design the combination of the ice sheets series is well suited for small cases but also Powerful for large water cooling systems.

Mounting is very simple with four screws on the optional "Eisdecken". An O-ring seals and the container can then be integrated into the system.

Technical Details:

  • Dimensions (LxWxH): 80 x 80 x 45mm
  • Water capacity: max. 123ml
  • Material: Acrylic
  • Thread: 1x 1/4“

Scope of delivery:

  • 1x Alphacool Eisdecke DDC/D5 Reservoir
  • 1x Bubble Down
  • 1x Allen key

 

Mounting manual

Download 3D-file (.stp) - with D5 Top

Download 3D-file (.stp) - with DDC Top

 

Notice: The 4 screws holding the container is mounted must only be tightened finger-tight (0,4Nm). There remains a small gap between the container and the pump cover. Excessive tightening may damage the cap and reservoir.


Please choose a category

Special offer

20% OFF

Alphacool's new Low Noise Edition of the Laing DDC for absolute silence! 

The Laing DDC pump is one of the best known pumps in the watercooling industry. Recently we have been working with Laing to take the DDC to the next level. The new Laing DDC310 was designed with a perfect balance of power and silence in mind. Unlike other versions with the plastic base we have revised the design with new superbly tuned brass housing which aids the pumps cooling and guarantees longer life especially when placed in areas with limited airflow.

This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved.

Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case.

The pump also comes as standard with an anti-vibration mounting system . Available in black nickel and silver nickel.

This pump should be the first choice for your watercooling system.

Technical Details

  • Dimensions: 61 x 60 x 21mm
  • Color: Black nickel, black
  • Power consumption: 10W
  • Material: Brass, Stainless Steel, Aluminium oxide, hard coal
  • Maximum lifting height: 2,44m
  • Maximum system temperature: 60 ° C
  • Maximum flow: 200l / h
  • Voltage: 12V DC
  • Power connector: 4 Pin Molex
  • Tacho signal: 3-Pin Molex

Scope of delivery

  • 1x Alphacool Laing pump DDC310
  • 1x Alphacool Laing DDC bottom metal - black nickel
  • 1x Thermal
  • Decoupling
  • mounting material

Download 3D-file (.stp)

 

Datasheet

Note
Not suitable for continuous operation with liquids containing titanium dioxide or glycerine. Typically, many pastel colors use these additives.